Contact us about us Employment

1.800.348.4RPM

RPM Solutions, Inc. Rapid City, SD

Products and Services -> Atomizer Parts - New

Atomizer Parts - New
 400mm Titanium Wheel | 350mm Titanium Wheel | 250mm Titanium Wheel | 240mm Titanium Wheel
 Atomizer Nozzle Design | Cone Nut Design Changes | Upper Wear Ring-Ceramic-Modified-Titanium
 Center Distribution Plate-Intermediate | Reverse Taper Nozzle

Atomizer Wheel Titanium - 89000 Series - Niro F800 Series 350mm

This atomizer wheel was redesigned to include the following features. Drag your cursor over each picture to see explanation of the features of the wheel.

Drive plate for 350mm atomizer wheel part number rs89506-t

Drive Plate - Titanium

This component is manufactured from aircraft grade titanium.

Part Number: RS89506-T
Drive plate for 350mm atomizer wheel part number rs89506-tO-rings for 350mm atomizer wheel part number RS89507-M-TCeramic lower wear ring for 350mm atomizer wheel part number RS89507-M-TCone nut for 350mm atomizer wheel part number RS88482-3S-M-LCase for 350mm atomizer wheel part number RS89504-TNozzle plugs for 350mm atomizer wheel part number RS88491-TNozzles for 350 mm atomizer wheel part number RS88482-1-TO-rings in case for 350mm atomizer wheelUpper wear ring ceramic for 350mm atomizer wheel part number RS89502-C-M-TLid for 350mm atomizer wheelFasteners for 350mm atomizer wheel
NOTE: Drag your cursor over each picture to see explanation of the features of the wheel.

Spray Dryer Catalog for 89000 Series F800 Series 350mm Click Here to view this part in our catalog.



Drive plate for atomizer wheel 350mm titanium design part number RS89506-T

Drive Plate - Titanium

This component is manufactured from aircraft grade titanium.

Part Number: RS89506-T

O-rings in drive plate on an atomizer wheel 350mm titanium design

O-Rings

The three o-rings on the drive plate plus an o-ring between the ceramic lower wear ring and the case are added to the drive plate to allow for the ceramic lower wear ring to float during operation.

Part Numbers:
89100-5.7x299.3, 89100-5.7x84.5, 89100-3x84.5

Ceramic lower wear ring for 350mm titanium atomizer wheel

Ceramic Lower Wear Ring-Titanium

This wheel design allows for a one piece ceramic lower wear ring that is contained with a titanium ring with an engineered interference fit. The titanium containment ring keeps the ceramic wear insert under compression during operation. Titanium material is used to prevent the chance of stress corrosion cracking. The design incorporates a stepped area with an o-ring seal between the ceramic lower wear ring and cone nut. This design prevents the slurry from reaching the stem of the drive plate and migrating underneath the ceramic lower wear ring.

Part Number: RS89507-M-T

Cone nut for 350mm titanium atomizer wheel design part number RS88482-3S-M-L

Cone Nut-Modified-Long

The ''Long'' cone nut design offers many advantages over the standard cone nut design. The four slots on the top of the standard cone nut have been replaced with a hex that is not exposed to the outside diameter of the cone nut. The cone nut covers the entire atomizer spindle, greatly reducing the amount of wear that occurs on the cone nut. Customers have experienced a substantial wear life increase with the design changes made to this cone nut.

Part Number: RS88482-3S-M-L

Case for 350mm titanium atomizer wheel part number RS89504-T

Case-Titanium

This component is manufactured from aircraft grade titanium. The case is symmetrical for easy one hundred and eighty degree rotation of the nozzles and allows for even wear on the outside diameter of the case.

Part Number: RS89504-T

Nozzle Plugs-Titanium

The nozzle plugs are made from aircraft grade titanium.

Part Number: RS88491-T

Nozzle plugs for a 350mm titanium atomizer wheel part number RS88491-T

Nozzle-Titanium

This nozzle incorporates a hardened upper cup for increased wear resistance. The hardened upper cup reduces wear on the nozzle, protecting the case from structural damage and ensuring that the wheel remains in balance. With this design, the nozzle is able to be removed and rotated for longer wear life of the component.

For more details, see our RPM Nozzle Design page.

Part Number: RS88482-1-T

O-rings for case for 350mm atomizer wheel

O-Ring

The o-ring on the case allows for the upper wear ring to float during operation.

Part Numbers:
89100-5.7x299.3, 89100-5.7x199.3

Upper wear ring ceramic for 350mm atomizer wheel part number RS89502-C-M-T

Upper Wear Ring-Ceramic-Modified-Titanium

In other designs, the lid acts as a structural component as well as a wear component. The wheel is designed to allow for RPM's patented upper wear ring design. This design separates the lid as a structural component and the upper wear ring as a wear component. The upper wear ring wear insert can be offered as a heat treated stainless steel or ceramic for extreme wear applications. The wear insert is contained with a titanium ring for superior corrosion resistance.

For more details, see our Upper Wear Ring-Ceramic-Modified-Titanium page.

Part Number: RS89502-C-M-T

Lid for 350mm titanium atomizer wheel part number RS89505-M-T

Lid-Titanium

This component is manufactured from aircraft grade titanium. This patented design allows for the lid to be a structural member only and the upper wear ring becomes the main wear component.

Part Number: RS89505-M-T

Fasteners for 350mm titanium atomizer wheel

Fasteners        

The fasteners are made from aircraft grade titanium.

Part Numbers:
(8) 89100-12X12-T,
(12) 89100-12X30-T,
(12) 89100-12X35-T

About RPM Solutions

About RPM and Associates (0)

The Atomizer Monitoring System provides the tools to help you manage all aspects of maintaining your Atomizers. Save Time. Save Money. Improve Safety. Find out how ...